|
|
| Tungsten
Carbide Based Powders for Thermal Spraying |
 |
| |
| Products Specifications |
|
|
| Name |
Powder Type |
Particle Size/um |
Reference Products |
Process |
Properties/Applications |
| Metco |
Praxair |
Starck |
| SA-S10201 |
WC-12Co |
-45/+15 |
WOKA 3102 WOKA 3103 |
1342VM |
519.074 518.1 518.054 |
AP/HVOF |
●Low oxygen
●Excellent Flowability
●Tough and dense coating with fine microstructure
●Smooth and Hard coating with High Bond Strength
●High resistance to Abrasion, Erosion and Sliding Wear
●Used up to 480℃
●Used for Paper Mill Rolls, Pump Parts, OilField Apparatus, Wire Drawing Equipments, Fan and Compressor Blades, Machine Parts etc. |
| SA-S10202 |
WC-12Co |
-38/+10 |
WOKA 3104 |
1342VF |
|
AP/HVOF |
| SA-S10203 |
WC-12Co |
-53/+20 |
WOKA 3101 Sulzer Metco 5812 |
|
518.088 519.088 |
AP/HVOF |
| SA-S10301 |
WC-17Co |
-45/+15 |
WOKA 3202 Diamalloy 5826 |
1343V |
527.074 |
AP/HVOF |
●Low oxygen
●Excellent Flowability
●Higher toughness and fretting resistance than WC 12%Co
●Hard, Dense coatings with good sliding, abrasion and hammer wear resistance
●Used up to 480℃
●Used for mid-span stiffeners, extrusion dies, Paper Mill Rolls, Pump Parts, Wire Drawing Equipments etc. |
| SA-S10302 |
WC-17Co |
-38/+10 |
|
1343VF |
|
HVOF |
| SA-S10303 |
WC-17Co |
-53/+20 |
Armdry 9830 |
|
527.088 |
AP/HVOF |
| SA-S10304 |
WC-17Co |
-53/+10 |
Diamalloy 2005NS |
|
526.062 |
HVOF/AP |
| SA-S10306 |
WC-17Co |
-63/+32 |
|
|
526.077 |
HVOF/AP |
| SA-S10501 |
WC-10Co-4Cr |
-45/+15 |
WOKA 3652 Diamalloy 5847-1 |
|
558.074 |
HVOF |
●Low oxygen
●Excellent Flowability
●Hard chrome replacement
●Excellent abrasion and erosion resistance
●Smooth and Tough coatings with fine micro structure and high bond strength
●Useable in wet corrosion enviroments
●Used up to 450℃
●Used for Paper Rolls, Gate and Ball Valves, Hydraulic Cylinders etc. |
| SA-S10503 |
WC-10Co-4Cr |
-53/+20 |
WOKA 3651 |
|
558.088 |
HVOF |
| SA-S10505 |
WC-10Co-4Cr |
-53/+11 |
Sulzer Metco 5847 |
|
|
HVOF |
| SA-S10527 |
WC-10Co-4Cr |
-30/+10 |
WOKA 3654 |
|
|
HVOF |
| SA-S20106 |
WC-8Co |
-60/+400 mesh |
|
|
|
HVOF/AP |
●Good resistance to abrasion and erosion
●Good Sliding wear resistance
●Hard and dense coating with good bond stregth
●Coatings are very dense
●Used up to 450℃
●Used for machine parts, knife blades, pump housing etc. |
| SA-S20110 |
WC-8Co |
-75/+45 |
|
Al-1071 |
|
AP |
| SA-S20206 |
WC-12Co |
-60/+400 mesh |
|
|
|
AP/HVOF |
| SA-S20406 |
WC-20Co |
-60/+400 mesh |
|
|
|
AP/HVOF |
| SA-S20405 |
WC-20Co |
-90/+45 |
Armdry 5670 |
|
|
AP/HVOF |
| SA-S20506 |
WC-10Co-4Cr |
-60/+400 mesh |
|
|
|
HVOF/AP |
●For hard chrome replacement
●Good resistance to abrasion and erosion
●Recommended for wet enviroments
●Used for Paper Rolls, Gates etc. |
| SA-S41222 |
(WC-12Co) 50NiSF |
-53/+15 |
|
1334F |
|
AP/HVOF |
●Excellent erosion and abrasion resistance
●Hard chrome replacement
●Used for extrusion screws, steel mill rolls etc. |
| SA-S41111 |
(WC-12Co) 25NiSF |
-45/+10 |
Sulzer Metco 5803-1 |
|
|
HVOF |
| SA-S41110 |
(WC-12Co) 25NiSF |
-75/+45 |
Metco 1123 |
|
|
AP |
| SA-S41412 |
50(WC 17Co)+50NiSF |
-63/+32 |
|
|
560.077 |
AP |
| SA-S41304 |
WC-12Co 35(Cr3C2 / 20(Ni20Cr)) |
-45/+5 |
Sulzer Metco 5860 |
|
|
AP |
●High corrosion resistance
●Good abrasion, erosion and fretting resistance
●Hard chrome replacement
●Used for petrochemical gate valves. |
| SA-S31018 |
W2C/WC 12Co |
-125/+31 |
Metco 71NS |
|
|
AP |
●Coating with high hardness as few carbide decompound under the protective of Co
●Dense coating with Fine Microstructure and High Bond Strength
●High Abrasion, Erosion and Sliding Wear Resistance
●Used up to 500℃
●Used for machine parts, pump housing etc. |
| SA-S31004 |
W2C/WC 12Co |
-45/+5 |
Diamalloy 2003 |
|
|
HVOF |
| SA-S31014 |
W2C/WC 12Co |
-125/+45 |
Armdry 302 |
|
|
AP |
| BAM Thermal Spraying Powders |
|
|
| BAM is specialized in Advanced Manufacturing Technology and holds annual production capacity of 300 tons spray powders. The agglomerated and sintered, Clad or Blended powders commonly used for producing abrasive, erosion, corrosion, oxidation or wear resistant coating by HVOF, Plasma spraying and Flame spraying. The powders are widely used for Turbine Engines, Wire Drawing Equipments, Fans and Compressor Blades, Pump Parts, Gate Valves, Piston Rings, Paper Rolls etc. in Aerospace, Power Plant, Machinery, Transportation, Chemical, Petroleum and Metallurgical industries. |
| |
| BAM is no way affiliated with the original equipment manufacturers (OEM) mentioned. All trademark listed herein are not of OEM's origin. References to the OEM's part numbers are for your convenience only. |
| |
|